The ISM4343-WBM-L54 is an embedded 2.4 GHz Wi-Fi and Bluetooth combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU. The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires … Continue reading “ISM4343-WBM-L54 Wi-Fi / BT Combo Module”
Author: invent
ISM4343-WBM-L54 Wi-Fi / BT Combo Module
ANTDOM-05-01-WPM GPS Antenna
Active GPS dome antenna with 5 meter cable with SMA connector. The antenna is waterproof, magnetic and is designed to work with a variety of GPS receivers. 1.575 GHz, 50 ohms, 3-5 VDC and a gain of 30 dB at 3.0 … Continue reading “ANTDOM-05-01-WPM GPS Antenna”
ISM43362-M3G-L44-E/U Serial-to-WiFi Module
The ISM43362-M3G-L44-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress CYW43362, an integrated antenna or optional external antenna, and a STM32F205 host processor that has a SPI or UART interface capability. The Wi-Fi module … Continue reading “ISM43362-M3G-L44-E/U Serial-to-WiFi Module”
INVENTEK ANNOUNCES A DUAL ARM CORTEX-R4 WI-FI MODULE
Inventek Systems Introduces the ISM43903 Low Cost Wi-Fi Module with Expanded Memory Capability for IoT applications August 20, 2018- Inventek Systems announces the release of the ISM43903 low cost Wi-Fi module for IoT applications. The ISM43903-R48-L54 is an 802.11 b/g/n, … Continue reading “INVENTEK ANNOUNCES A DUAL ARM CORTEX-R4 WI-FI MODULE”
ISMART 43362-E Arduino Shields – Wi-Fi 2.4Ghz
The ISMART43362-E (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield. The ISMART43362-E shield is assembled with the Inventek eS-WiFi module ISM43362-M3G-L44-E . It is a 2.4 GHz Wi-Fi 802.11 b/g/n based on Cypress CYW43362 Radio, St … Continue reading “ISMART 43362-E Arduino Shields – Wi-Fi 2.4Ghz”
ISMART 43903-E Arduino Shields – Wi-Fi 2.4 GHz
The ISMART43903-E (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield . The ISMART43903-E shield is assembled with the Inventek eS-WiFi ISM43903-R48-L54-E/U module. The Wi-Fi module hardware consists of a Cypress CYW43903 SOC with ARM … Continue reading “ISMART 43903-E Arduino Shields – Wi-Fi 2.4 GHz”
ISM43903-R48-L54-E/U Serial-to-WiFi WICED Module
The ISM43903-R48-L54-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional … Continue reading “ISM43903-R48-L54-E/U Serial-to-WiFi WICED Module”
What additional certifications do I need to have for my end product that uses your certified module?
Even though the eS-WiFi module is certified, the end product will still have to go through a small portion of RF certification. Also developers may need to apply for country specific certifications.
Maximum number of supported sockets?
A maximum of eight (5) TCP or UDP sockets are supported on the ISM43362 module and two (2) for the ISM4319 module.
Which host micro controller is recommended?
Any controller that has a UART or SPI interface can be connected to the eS WiFi module.