Download and install Drivers: (download eS-WiFiDemo_v1.1_b12.zip) Save the es-Wifi Demo.Zip Unzip and enter password (Located inside packaging box) Run as Administrator

1. Join Network (see How to join a network) 2. Setup a TCP/UDP connection (see How to setup a TCP/UDP Comm Server/Client) 3. Set number of bytes of data to be sent 4. Send data EX. S1=10      Set NOB … Continue reading “How do you send data using the eS-WiFi module?”

1. Set parameter 2. Z1      Save current settings Ex. Set UART buad U2=19200      Set buad rate to 19200 Z1      Save current settings Next time the module is reset or power up the baud rate will be 19200.

No, antenna diversity is not supported currently.

The eS-WiFi SoftAP supports infrastructure mode for peer-to-peer connections.

1. Set Protocol to TCP 2. Set Local port number 3. Start TCP Comm Sever EX. P1=0      Select TCP Protocol P2=80      Set Port 80 P5=1      Start TCP Comm Server

1. Set Protocol to UDP 2. Set Remote Host IP Address 3. Set Remote Port 4. Start UDP Client EX. P1=1    Select UDP Protocol P3=192.168.1.2    Set Host IP Address P4=8001    Set Port 8001 P6=1    Start UDP Client

1. Z3=0    Select factory space 2. Z2    Clear settings 3. ZR or    Reset     RSTN

eS-WiFi Archive Firmware Versions Version 1.2 – Released Date:  8/8/12 Version 1.1 – Released Date:  4/22/12 Version 1.0 – Released Date:  1/18/12

It can run on all Windows XP, Vista and Windows 7 operating systems. We recommend that you right click on the application and run as Administrator. Some of the demo applications are designed to send and receive files and the … Continue reading “Can the eS-WiFi demo software run on any computer?”