The ISM43439-WBP-L151 – The ISM43439-WBP-L151 SiP (System In Package) is an “ALL” Infineon-based IoT platform (Infineon Radio + Infineon MCU + Certified Antenna). The ISM43439-WBP-L151 SiP is also a cost-effective, high-performance, and secured IoT architecture with one of the industry’s only dedicated Wi-Fi 4 solutions to deliver the latest WPA3 security standard. As a Wi-Fi/Bluetooth/BLE combo chip for IoT applications, the new Inventek ISM43439- WBP-L151 module will make it easier for product designers to comply with new security regulations currently emerging worldwide, including the California Consumer Privacy Act. This, for example, gives more privacy rights to consumers, including the right to know about the personal information a business collects and the right for that information to be deleted.
The Inventek ISM43439-WBP-L151 module also includes an integrated PSoC 6 MCU. Herald as the sixth generation of the PSoC family, PSoC 6 is purpose-built to speed the development of any IoT application, the ultra-low-power dual-core PSoC 6 family features both an Arm Cortex-M4 and Cortex-M0+ core. Ideally suited for battery-powered applications, the dual-core architecture permits embedded developers to optimize their design for power and performance. As with any IoT application, security is a primary requirement, and the integrated PSoC 6 MCU incorporates Arm’s latest platform security architecture (PSA).
(more…)
ISM4343-WBU-L151
The Inventek ISM4343-WBU-L151 SiP (10x10mm) offersasingle-band IEEE 802.11b/g/n-compliant MAC/PHY, and BT/BLE5.3radio. Channel bandwidth of 20MHz is supported for IEEE 802.11b/g/ntrafficwith integrated ST Micro STM585Cortex M33MCU that runs the TCP/IP stack.The ISM4343-WBU-L151SiPintegrates theInfineonCYM4343WWi-Fi/BTcombo-radio, STM32U585series advanced power-saving microcontroller, based on Arm®Cortex®-M33, with 2Mbytes of Flash (dual bank) memory and 786 Kbytes of SRAM, plus an additional2 M bytes of SPI Flash (MX25L1633EWS), for a total flash of 4 Mbytes in a small form factor 10×10 mm LGA Module. The ISM4343-WBU-L151802.11 b/g/n enables wireless connectivity to the most straightforwardexisting sensor products with minimal engineering effort.The ISM4343-WBU-L151reduces development time, lowers manufacturing costs, saves board space, simplifies certification compliance, and minimizes customer RF expertise required during development of target applications. The ISM4343-WBU-L151SiP usesInfineon’sCYW4343Whighly integrated single chip combo radio solution.The CYW4343has integrated power amplifiers, LNAs and T/R switches for the 2.4 GHz WLAN band. The ISM4343-WBU-L151supportsthe BTLow Energy operating mode, which provides a dramatic reduction in the power consumption of the BTradio and baseband. The primary application for this mode is to provide support for low data rate devices, such as sensors and remote controls.TheISM4343-WBU-L151implements the highly sophisticated Enhanced Collaborative Coexistence algorithms and hardware mechanisms, allowing for an extremely collaborative BTcoexistence scheme along with coexistence support for external radios such as cellular LTE, GPS, and Ultra-Wideband.An independent, high-speed UART is provided for the BThost interface.
Overview
WLAN, Bluetooth & MCU functions:
- Arm Cortex-M33 core running at 160 MHz
- 240 DMIPS and 651 CoreMark scores
- New ST ART Accelerator: working both on internal and external Flash (8 Kbytes of instruction cache)
- 4 Mbytes of flash (2Mbyteson ST Microcontrollerplus2 Mbytes connected to SPI, MX25L1633EWS)
- Higher level of safety with 100 kcycles for 512 KB of flash
- ADC14-bit
- Single-band 2.4 GHz b/g/n, 802.11b, 802.11g, 802.11n (single stream)
- 32KHz RTC, 26MHz and 37.4 MHz clocks on boardthe SiP
- Host serial interface forboth UARTandSPI
- On-chip WLAN driver executionsupporting IEEE 802.11 functionality
- Advanced 1×1 802.11n features
- Concurrent BTand WLAN operation
- Supports a single 2.4 GHz antenna shared between WLAN and BT
- BT host digital interface (can be used concurrently with above interface)
- BTv5.1with integrated Class 1 PA
- BT2.1+EDR, BT3.0, BT4.2, BT5.3(BTLow Energy)
- ECI –enhanced coexistence support, ability to coordinate BT SCO transmissions around WLAN receives
- I²S/PCM for BT audio
- HCI high-speed UART (H4, H4 +, H5) transport support
- BTSmartAudio® technology improves voice and music quality to headsets
- The BBC supports all BT4.0 features
Product Documentation
Technical Resources
Contact Inventek
We are looking forward to answering all your inquiries regarding sales, technical and customer support, distribution volume pricing and delivery options
Contact Inventek
ISM4343-WBM-L151 Wi-Fi / BT Combo Module
The ISM4343-WBM-L151 is an embedded 2.4 GHz Wi-Fi and Bluetooth 4.2 combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU. The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product.
The module has a very small 10 mm x 10 mm surface mount footprint and has FCC and CE module certification. (more…)
ISMART 4343-C Wi-Fi 2.4 GHz & Bluetooth Combo Evaluation Board
The ISMART4343-C IoT evaluation platform is a user-friendly Arduino form factor, 3.3V shield . The ISMART4343-C shield is assembled with the Inventek eS-WiFi module ISM4343-WBM-L54-C/U
It is a Wi-Fi 2.4 & 5 GHz & Bluetooth classic & BLE combo SOC supporting 802.11 b/g/n based on Cypress CYW4343 Radio, ST Microcontroller STM32F412 with 1 Meg of Flash and Antenna. (more…)
ISMART 43340-C Wi-Fi 2.4 & 5GHz & Bluetooth & BLE Evaluation Board
The ISMART43340-C IoT platform 3.3V shield . The ISMART43340-C shield is assembled with the Inventek eS-WiFi module ISM43340-M4G-L44-C
It is a Dual band Wi-Fi 2.4 & 5 GHz & Bluetooth classic & BLE combo SOC supporting 802.11 a/b/g/n based on Cypress CYW43340 Radio, ST Microcontroller STM32F405 with 1 Meg of Flash and Antenna. (more…)
ISMART 43903 IoT Evaluation Board
The ISMART43903C-EVB is an embedded 2.4 GHz Wi-Fi 802.11 /b/g/n, evaluation board that is populated with the ISM43903-R48-L54-E/U is an embedded 2.4 GHz Wi-Fi module.
The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional external antenna, 1 MB of SRAM and 640 KB ROM available for the applications processor, SPI or UART interface capability.
(more…)
ISM43340-M4G-L44 Serial-to-Wi-Fi Dual Band (2.4 & 5 GHz) & BLE Combo Module
The ISM43340-M4G-L44 is an embedded 2.4 & 5 GHz Wi-Fi 802.11 a/b/g/n, Bluetooth Low Energy (BLE) and Bluetooth 4.0 module. The module hardware consist of a Cypress CYW43340 Combo radio, antenna and a STM32F405 host processor with 1MB of flash and supports SPI or UART host interfaces.
The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a small 14.70mm x 34.22mm surface mount footprint and has full FCC, IC and CE module certification. (more…)
ISM4343-WBM-L54 Wi-Fi / BT Combo Module
The ISM4343-WBM-L54 is an embedded 2.4 GHz Wi-Fi and Bluetooth combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU.
The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product. (more…)
ISM43362-M3G-L44-E/U Serial-to-WiFi Module
The ISM43362-M3G-L44-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress CYW43362, an integrated antenna or optional external antenna, and a STM32F205 host processor that has a SPI or UART interface capability.
The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a very small 14.5mm x 30mm surface mount footprint and has full FCC, IC, Japan and CE module certification. (more…)
ISMART 43362-E Arduino Shields – Wi-Fi 2.4Ghz
The ISMART43362-E (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield. The ISMART43362-E shield is assembled with the Inventek eS-WiFi module ISM43362-M3G-L44-E .
It is a 2.4 GHz Wi-Fi 802.11 b/g/n based on Cypress CYW43362 Radio, St Micro STM32F205 microcontroller with 1 Meg of Flash and antenna. (more…)