ISMART 43903-E Arduino Shields – Wi-Fi 2.4 GHz

The ISMART43903-E (Inventek Systems Module Arduino Test) IoT platform is a user-friendly Arduino form factor, 3.3V shield . The ISMART43903-E shield is assembled with the Inventek eS-WiFi ISM43903-R48-L54-E/U module.

 The Wi-Fi module hardware consists of a Cypress CYW43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional external antenna, 1 MB of SRAM and 640 KB ROM available for the applications processor. (more…)

ISM43903-R48-L54-E/U Serial-to-WiFi WICED Module

The ISM43903-R48-L54-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional external antenna, 1 MB of SRAM and 640 KB ROM available for the applications processor, SPI or UART interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires development utilizing the Cypress WICED SDK. The module has a very small 14.5mm x 30mm surface mount footprint and has full FCC and CE module certification. (more…)

Wi-Fi Chip Antenna – Dual Band 2.4 Ghz & 5 GHz

The W245-SC Dual Band Wi-Fi antenna 3.2 x 1.6 x 0.5 mm (2400-2500) & (4900-5900) MHz Chip antenna let’s you integrate Wi-Fi functionality into your product quickly and easily. It’s suitable for a wide range of applications and recommended for use with Inventek’s eS-WiFi modules. (more…)

Wi-Fi Antenna 2.4 Ghz Right Angle SMA Male (P/N W24-RSMA-M)

The W24-RSMA-M Wi-Fi antenna 2400-2500 Mhz  Right angle sma male (46.5 mm long) with a gain (dBi) of 2.15. It’s suitable for a wide range of Wi-Fi applications and recommended for use with Inventek eS-Wi-Fi modules.

Product specification

W24-RSMA-M Functional Specification – Inventek’s Wi-Fi antenna is designed to connect to the eS-Wi-Fi family of modules. This antenna has also passed complete FCC, CE and IC certification using the Inventek eS-Wifi modules.

  • Stable and reliable in performances
  • The  antenna has excellent sensitivity to consistently provide high signal reception efficiency
  • Compact size
  • RoHS compliance

Buy Online from Our Valued Distributors

Buy Inventek products from DigiKey
Buy Inventek products at Avnet
Buy Inventek products at Arrow Electronics
Buy Inventek products from Texim Europe

Buy Online at Inventek Store

Buy Online at Inventek Store

Contact Inventek

For all your inquiries regarding sales, technical and customer support, distribution volume pricing and delivery options
Contact Inventek

Wi-Fi Antenna – Dual Band 2.4 Ghz & 5GHz PCB

The W2.4-5P-U Dual Band Wi-Fi antenna (2400-2500) & (4900-5900) MHz PCB antenna with connector (40 x 6.0 mm) let’s you integrate Wi-Fi functionality into your product quickly and easily. It’s suitable for a wide range of applications and recommended for use with Inventek’s eS-WiFi modules. (more…)

ISM43340-L77 Dual band (2.4 / 5GHz) Wi-Fi, Bluetooth & BLE SiP Module

The ISM43340-L77 quad-radio device provides the highest level of integration for wireless system, with integrated dual band (2.4 GHz/ 5 GHz) Wi-Fi, IEEE 802.11 a/b/g/n single-stream, MAC/baseband/radio, Bluetooth 4.0 for Linux processors with SDIO interfaces.
The FCC/CE/IC module includes integrated power amplifiers, LNAs and T/R switches for the 2.4 GHz and 5 GHz WLAN bands, greatly reducing the external part count, 13mm x 14.4mm PCB footprint, and low cost of the solution.
(more…)

ISM43340-L77 Dual Band Wi-Fi 2.4/ 5 GHz, Bluetooth & BLE Linux EVB

The ISM43340-L77-EVB evaluation board offers 802.11 Wi-Fi connectivity over an SDIO interface, as well as Bluetooth over a UART interface. The combo radio is targeted at embedded Linux applications using FMAC drivers. (more…)

Wi-Fi 2.4 Ghz SDIO SIP Module with Antenna

The ISM43362-L36 is an 802.11 b/g/n Wi-Fi Radio SiP with on board antenna or optional external antenna with a U.FL connector, which is designed for embedded wireless solutions and offers a cost-effective high performance Broadcom radio device (BCM43362) packaged in an 36 pin LGA (24.4mm x 15.3 mm). The ISM43362-L36 is a FCC/UL/Japan certified module with a SDIO host interface for embedded Linux.

The ISM43362-L36-E/U can be ordered as a (-E) on board etched antenna or (-U) a connector for an external antenna that has been certified (P/N W24P-U)

The product is intended for embedded Linux/Android applications running on a qualified host processor with a SDIO interface. This product is targeted at high volume designs with experience Linux/Android customers. (more…)

Wi-Fi 2.4 Ghz PCB Antenna (P/N W24P-U)

The W24P-U Wi-Fi PCB antenna 2400-2500 Mhz (30 x 5 mm) with U.fl connector, let’s you integrate Wi-Fi functionality into your product quickly and easily. It’s suitable for a wide range of applications and recommended for use with Inventek eS-Wi-Fi modules. (more…)

Wi-Fi 2.4 Ghz Antenna SMA Male (P/N W24-SSMA-M)

The W24-SSMA Wi-Fi Antenna 2400-2500 Mhz Wi-Fi sma male (49.85 mm long) with a gain (dBi) of 2.15. It’s suitable for a wide range of Wi-Fi applications and recommended for use with Inventek eS-Wi-Fi modules.

Product specification

W24-SSMA-M Functional Specification

Inventek’s Wi-Fi antenna is designed to connect to the eS-Wi-Fi family of modules. This antenna has also passed complete FCC, CE and IC certification using the Inventek eS-Wifi modules.

  • Stable and reliable in performance
  • The antenna has excellent sensitivity to consistently provide high signal reception efficiency
  • Compact size
  • RoHS compliance

Buy Online from Our Valued Distributors

Buy Inventek products from DigiKey
Buy Inventek products at Avnet
Buy Inventek products at Arrow Electronics
Buy Inventek products from Texim Europe

Buy Online at Inventek Store

Buy Online at Inventek Store

Contact Inventek

For sales technical support distribution Volume Pricing and delivery options
Contact Inventek