ISM4343-WBM-L151 Wi-Fi / BT Combo Module

The ISM4343-WBM-L151 is an embedded 2.4 GHz Wi-Fi and Bluetooth 4.2 combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU. The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product.

The module has a very small 10 mm x 10 mm surface mount footprint and has FCC and CE module certification. (more…)

ISM43340-M4G-L44 Serial-to-Wi-Fi Dual Band (2.4 & 5 GHz) & BLE Combo Module

The ISM43340-M4G-L44 is an embedded 2.4 & 5 GHz Wi-Fi 802.11 a/b/g/n, Bluetooth Low Energy (BLE) and Bluetooth 4.0 module. The module hardware consist of a Cypress CYW43340 Combo radio, antenna and a STM32F405 host processor with 1MB of flash and supports SPI or UART host interfaces.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a small 14.70mm x 34.22mm surface mount footprint and has full FCC, IC and CE module certification. (more…)

ISM4343-WBM-L54 Wi-Fi / BT Combo Module

The ISM4343-WBM-L54 is an embedded 2.4 GHz  Wi-Fi and Bluetooth combo module. The module hardware consists of the Cypress CYW4343 radio and ST Micro STM32F412 Cortex MCU.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product. (more…)

ISM43362-M3G-L44-E/U Serial-to-WiFi Module

The ISM43362-M3G-L44-E/U is an embedded 2.4 GHz  Wi-Fi  module. The Wi-Fi module hardware consists of a Cypress CYW43362, an integrated antenna or optional external antenna, and a STM32F205 host processor that has a SPI or UART  interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command set to establish connectivity for your wireless product. The module has a very small 14.5mm x 30mm surface mount footprint and has full FCC, IC, Japan and CE module certification. (more…)

ISM43903-R48-L54-E/U Serial-to-WiFi WICED Module

The ISM43903-R48-L54-E/U is an embedded 2.4 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43903 SOC with ARM Cortex-R4 clocked at 160 MHz (in 1× mode) or up to 320 MHz (in 2× mode), an integrated antenna or optional external antenna, 1 MB of SRAM and 640 KB ROM available for the applications processor, SPI or UART interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires development utilizing the Cypress WICED SDK. The module has a very small 14.5mm x 30mm surface mount footprint and has full FCC and CE module certification. (more…)

Wi-Fi 2.4/ 5GHz, Bluetooth, BLE & Near Field Comm SiP Module

The ISM43341-L77 quad-radio device provides the highest level of integration for wireless system, with integrated dual band (2.4 GHz/ 5 GHz) IEEE 802.11 a/b/g/n single-stream, MAC/baseband/radio, Bluetooth 4.0. It also integrates a low power NFC controller.

Product Specifications:

The ISM43341 includes integrated power amplifiers, LNAs and T/R switches for the 2.4 GHz and 5 GHz WLAN bands, greatly reducing the external part count, PCB footprint, and cost of the solution.

This product is intended for embedded Linux/ Android applications running on qualified Host processors with a SDIO interface. This product is targeted at high volume designs with experienced Linux/Android customers.  A Software License Agreement is required for Driver support.

Product Overview

  • Wi-Fi standards, speeds and security:
    • 802.11 a/b/g/n with speeds up to 72Mbps
    • WEP(64/128-bit), WPA, WPA2 (Personal), 802.11i(AES, TKIP, 802.1x)
  • System-in-Package design, no need for external crystal oscillators or RF switches
  • Single supply voltage of 3.3VDC ±5%
  • 77 pin LGA package (13.3mm x 14.5 mm, 2 mm)
  • WLAN, Bluetooth functions:
    • Shared Single and dual-antenna support
    • WLAN host interface :4-bit SDIO for easy host interfacing
    • BT host digital interface (can be used concurrently with above interface): UART (up to 4 Mbps)
    • ECI – enhanced coexistence support, ability to coordinate BT SCO transmissions around WLAN receives
    • I²S/PCM for BT audio
    • HCI high-speed UART (H4, H4 +, H5) transport support
    • Bluetooth SmartAudio® technology improves voice and music quality to headsets
    • Bluetooth low power inquiry and page scan
    • Bluetooth Low Energy (BLE) support
    • Bluetooth Packet Loss Concealment (PLC)
    • Bluetooth Wide Band Speech (WBS)

    The ISM43341 supports the following NFC features:

    • Individual byte framing
    • Reader/Writer (R/W) modeActive and Passive Peer-to-Peer (P2P) mode
    • Tag/Card Emulation mode:
    • Support for battery-enabled card emulation mode
    • Support for two levels of “residual” battery-assisted card emulation mode

    Radio Only SIP Summary

    340 431 SIP driver details

    Evaluation Boards

    Rocky Mini ISM43341-L77 EVB
    ISM43340-L77 EVB

    Applications

    • Internet Enabled Consumer Devices
    • M2M (Machine-to-Machine)
    • Industrial Handheld Devices
    • Asset/Inventory Management
    • POS Terminals
    • Medical Equipment
    •  Wi-Fi Enabled Security Cameras

    Contact Inventek

    We are looking forward to answering all your inquiries regarding sales, technical and customer support, distribution volume pricing and delivery options
    Contact Inventek

ISM43340-L77 Dual band (2.4 / 5GHz) Wi-Fi, Bluetooth & BLE SiP Module

The ISM43340-L77 quad-radio device provides the highest level of integration for wireless system, with integrated dual band (2.4 GHz/ 5 GHz) Wi-Fi, IEEE 802.11 a/b/g/n single-stream, MAC/baseband/radio, Bluetooth 4.0 for Linux processors with SDIO interfaces.
The FCC/CE/IC module includes integrated power amplifiers, LNAs and T/R switches for the 2.4 GHz and 5 GHz WLAN bands, greatly reducing the external part count, 13mm x 14.4mm PCB footprint, and low cost of the solution.
(more…)

Wi-Fi 2.4 Ghz SDIO SIP Module with Antenna

The ISM43362-L36 is an 802.11 b/g/n Wi-Fi Radio SiP with on board antenna or optional external antenna with a U.FL connector, which is designed for embedded wireless solutions and offers a cost-effective high performance Broadcom radio device (BCM43362) packaged in an 36 pin LGA (24.4mm x 15.3 mm). The ISM43362-L36 is a FCC/UL/Japan certified module with a SDIO host interface for embedded Linux.

The ISM43362-L36-E/U can be ordered as a (-E) on board etched antenna or (-U) a connector for an external antenna that has been certified (P/N W24P-U)

The product is intended for embedded Linux/Android applications running on a qualified host processor with a SDIO interface. This product is targeted at high volume designs with experience Linux/Android customers. (more…)

ISM43907-WM-L170 Serial-to-WiFi Module

The ISM43907-WM-L170 is an embedded 2.4 & 5.0 GHz Wi-Fi module. The Wi-Fi module hardware consists of a Cypress 43907 SOC with ARM Cortex-R4 clocked at 320 MHz, 2 MB of SRAM and 640 KB ROM, all clocks, T/R switch and duplexer available for the applications processor, SPI or UART interface capability.

The Wi-Fi module requires no operating system and has an integrated TCP/IP stack that only requires a simple AT command or the Cypress WICED SDK set to establish connectivity for your wireless product. The module has a very small 11 mm x 11 mm surface mount footprint (more…)