Tag: WiFi
Is the eS-WiFi module’s SPI interface slave or master?
The eS-WiFi SPI interface is a slave.
Do the eS-WiFi L44 modules support SPI mode? What pins should I use to connect SPI?
Yes, the eS-WiFi modules support SPI. The correct pins to use for the host I/O are the ADC1-ADC4 pins. SPI_SCK=ADC2=Pin11 SPI_MISO=ADC3=Pin10 SPI_MOSI=ADC4=Pin9 SPI_NSS=ADC1=Pin12
Which drivers do you support for the ISM4319 SIP?
Linux, Android and WinCE drivers are available.
Do you need a SLA to purchase the eS-WiFi modules?
Yes, we have a royalty free object code SLA agreement.
Can an external antenna be interfaced to eS-Wifi modules?
Yes. We supply certain modules with U.FL connectors. We use a “-U” at the end of the part number to designate those with the U.FL connector. The ISM4319-M3-L44-U and ISM43362-M3G-L44-U have U.FL connectors and our antenna, part number w24-SSMA-M has been FCC and … Continue reading “Can an external antenna be interfaced to eS-Wifi modules?”
Do you include any drivers with your eS-Wifi modules?
The es-Wifi module is based on a simple AT command set that is used to communicate with the module. You can use a low cost 8/16/32 bit microcontroller to control the eS-WiFi module.
What is the range of your es-Wifi modules?
The range varies depending on what antenna scheme you choice. The options are PCB etch and external. The distance depends on environmental conditions, but the range is approximately 250 meters line of sight with up to 5 Mbps Wi-Fi connection … Continue reading “What is the range of your es-Wifi modules?”
How do I connect the eS-Wifi module to my host microprocessor via UART?
UART Connect TX on the Module to RX on your Microcontroller Connect RX on the Module to TX on your Microcontroller
How do set-up a UDP Comm Server using the eS-WiFi module?
1. Set Protocol to UDP 2. Set Local port number 3. Start UDP Comm Sever EX. P1=1 Select UDP Protocol P2=5024 Set Port 5024 P5=1 Start UDP Comm Server
Inventek Systems Signs North American Distribution Agreement with Arrow Electronics for 802.11 Wi-Fi Modules
Inventek Systems today announced a North American distribution agreement with Arrow Electronics for Inventek’s complete portfolio of 802.11 b/g/n modules based on Broadcom’s Wi-Fi technology and includes all the software required for easy system. Arrow Electronics will distribute Inventek System’s … Continue reading “Inventek Systems Signs North American Distribution Agreement with Arrow Electronics for 802.11 Wi-Fi Modules”